Skip to main content
Whirlpool Home Appliances

No

 

Possible Solutions

Is the Control Lock On?

To unlock:

  • Press and hold START (on single oven) or the lower START (on double ovens) for 3 seconds to unlock 
  • No keypads will function with the controls locked.

Refer to your Use & Care Guide for more information on setting Self-Clean or Control Lock.

Did you set the oven controls for a Self-Clean cycle?

  1. Close the oven doors, then press CLEAN MODES.
  2. For double ovens only:  Press the "1" or "2" number keypad to select the desired oven to clean.
  3. Press the number "1" keypad for Precise Clean.
  4. Press START.

Refer to your Use & Care Guide for more information on setting Self-Clean or Control Lock.

Has a household circuit breaker tripped or fuse blown?

Check to make sure a household fuse has not blown or that a circuit breaker has tripped. Reset the circuit breaker or replace the fuse if necessary. If the problem continues, contact a licensed electrician.

If not resolved, please note the following:

  • Do not continue to attempt to operate the wall oven.
  • Disconnect power cord and/or turn off circuit breaker that controls the appliance.

 

If you would like to download or view product literature for your appliance, please visit our Manuals and Literature page.

 

Still need help? Call or schedule service.

You may need assistance from a qualified technician. Call 1-866-698-2538 or click below to schedule an appointment.

 

 

  • Was this article helpful?