Skip to main content
Whirlpool Home Appliances

Yes

 

Possible Solutions

Did you set the oven controls for a Self-Clean cycle or a Delay Start Self-Clean?

To set a Self-Clean cycle:

  1. Close the oven door, then press CLEAN MODES.
  2. For double ovens only:  Press the "1" or "2" number keypad to select the desired oven to clean.
  3. Press the number "1" keypad for Precise Clean.
  4. Press START.

To set a Delay Start Self-Clean cycle:

  1. Close the oven door, and then press START TIME.
  2. For double ovens only:  Press the "1" or "2" number keypad to select the desired oven to clean.
  3. Press the number keypads to enter the desired amount of time by which you want to delay the start.
  4. Press CLEAN MODES.
  5. Press the number "1" keypad for Precise Clean.
  6. Press START.

Refer to your Use & Care Guide for more information on setting a Self-Clean cycle.

If you would like to download or view product literature for your appliance, please visit our Manuals and Literature page.

Is the oven door open?

Make sure the oven door is closed all the way.

Is the oven door latching?

Unlike other functions, self clean will only work when the door is closed and properly latched. Close the door and listen for the door to latch when starting the self clean cycle.  

 

Still need help? Call or schedule service.

You may need assistance from a qualified technician. Call 1-866-698-2538 or click below to schedule an appointment.

 

 

  • Was this article helpful?