Using the Load & Go™ Bulk Dispenser

Filling the Bulk Dispenser

1. Open the bulk container lid on the top of the washer/dryer.
2. Lift the fill door on the Liquid Detergent dispenser (Dispenser 1). Add liquid HE detergent up to the “MAX” line. Do not overfill. Close the fill door. It will click into place.
3. Lift the fill door on the Liquid Fabric Softener dispenser (Dispenser 2). Add liquid fabric softener up to the “MAX” line. Do not overfill. Close the fill door. It will click into place.  
4. Slowly close the bulk container lid. Make sure it is completely closed.
5. Make sure that the bulk dispenser is active. Use the Tools button to ensure that both Dispenser 1 and Dispenser 2 are active and that the detergent concentration is correct

.

NOTES:

• Dispenser 2 may be used as a second Liquid HE Detergent dispenser. Use the Tools button (go to “Load & Go™ Dispenser 2”) to change the content in  Dispenser 2 and set the detergent concentration. Make sure that dispenser 1 is disabled.
• The entire Load & Go™ bulk container can be easily removed for easy cleaning.
• Clean the Liquid Detergent dispenser (Dispenser 1) before switching to a different detergent brand.
• Thoroughly clean the Liquid Fabric Softener dispenser (Dispenser 2) before switching from liquid fabric softener to liquid detergent, switching back from liquid detergent to liquid fabric softener, or switching to a different detergent brand.

NOTE:  If you will not be using your Load & Go™ Bulk Dispenser for an extended period of time, completely clean out the unit and dispose of all detergent and fabric softener. 

IMPORTANT:

• Do not use chlorine bleach in this washer/dryer. Chlorine bleach will damage it.
• Do not add a single-dose laundry packet to the bulk dispenser.
• Do not use powdered HE detergent in the bulk dispenser.