Skip to main content
Whirlpool Home Appliances

Cleaning the Load & Go™ Bulk Dispenser

Cleaning the Load & Go™ Bulk Dispenser on your Whirlpool All-in-One Washer and Dryer

Radiant Load and Go.jpg


After a period of using your washer/dryer, you may find some residue buildup in the Load & Go™ bulk dispenser. To remove residue from the dispensers, lift the handle on the dispenser container housing to remove it from the washer/dryer cabinet, then rinse the two dispensers thoroughly with running water. Wipe the outside dispenser container surfaces with an affresh® Machine Cleaning Wipe or a damp cloth and towel dry. Use an all-purpose surface cleaner, if needed.
Replace the dispenser container in the washer/dryer cabinet and make sure that it is seated.

IMPORTANT: Load & Go™ bulk dispenser container is not dishwasher-safe.

If removing the dispenser for either cleaning or to change the detergent or softener, pull the dispenser straight up. Hold the dispenser level to avoid any spilling of liquid that may still be inside. 

For further questions on the Load & Go™ bulk dispenser, see the troubleshooting guide or your Use & Care Guide.

If you would like to download or view product literature for your appliance, please visit our Manuals and Literature page.