Skip to main content
Whirlpool Home Appliances

Cleaning the Load & Go™ Bulk Dispenser

Possible Solutions

Cleaning the Load & Go™ Bulk Dispenser

Radiant Load and Go.jpg

After a period of using your washer/dryer, you may find some residue buildup in the Load & Go™ bulk dispenser. To remove residue from the dispensers, lift the handle on the dispenser container housing to remove it from the washer/dryer cabinet, then rinse the two dispensers thoroughly with running water.

Wipe the outside dispenser container surfaces with an affresh® Machine Cleaning Wipe or a damp cloth and towel dry. Use an all-purpose surface cleaner, if needed.

Replace the dispenser container in the washer/dryer cabinet and make sure that it is fully seated.

IMPORTANT: Load & Go™ bulk dispenser container is not dishwasher-safe.

If removing the dispenser for either cleaning or to change the detergent or softener, pull the dispenser straight up. Hold the dispenser level to avoid any spilling of liquid that may still be inside. 


Still need help? Call or schedule service.

You may need assistance from a qualified technician. Call 1-866-698-2538 or click below to schedule an appointment.



  • Was this article helpful?