Skip to main content
Whirlpool Home Appliances

Cleaning your Load & Go™ Dispenser (on some models)

Possible Solutions

Cleaning your Load & Go™ Dispenser (available on some models)

You may find laundry product residue left over in your dispenser drawer. To remove residue, follow this recommended cleaning procedure:

  1. Gently pull the Load & Go™ drawer past the drawer stop and out of the washer.
  2. Wash in hot, soapy water, using a mild detergent.
  3. Rinse with warm water.
  4. Air dry, or dry with a towel.
  5. Place drawer back into slot. Make sure drawer is properly seated.

IMPORTANT: Load & Go™ drawer is not dishwasher safe.

NOTE:  After cleaning and refilling the Load & Go™ dispenser, run a "Quick Wash" cycle with no clothing. The dispenser must prime itself the first use after running empty. If this does not happen, there will be no detergent in the first wash cycle after cleaning.

Load & Go Disp.JPG


Still need help? Call or schedule service.

You may need assistance from a qualified technician. Call 1-866-698-2538 or click below to schedule an appointment.



  • Was this article helpful?