Nothing is Working - No Power - Electric Range

New installation or electrical connection?

If this appliance was newly installed, check the following to ensure the power supply was connected correctly:

• Strain relief is tightened against the power supply cord.
• All terminal wires are in the correct locations (colors match).
• Hex nuts on the terminal block posts are secure and tightened.

Check the installation instructions for complete details. 

Is the control lock on? 

The control lock on a range is intended to "lock" the control from unintended use. This is perfect for households with children who like to touch buttons so the range cannot be turned on accidentally or turned off when running.  

Has a household circuit breaker tripped or the fuse blown?

Check to ensure a household fuse has not blown or a circuit breaker has tripped. If necessary, reset the circuit breaker or replace the fuse.

Has a recent power outage occurred?

During a power outage, if the control detects an unexpected amount of power supply line "noise" as an incorrect voltage amount, it could display the F9 or F9 E0 error code. Also, if any keys are pressed before the 10-second delay interval on power-up, the F9 or F9 E0 could appear.

If a recent power outage has occurred, turn off the household circuit breaker for the range for one (1) minute.  Then, reset the circuit breaker and monitor the range for one (1) minute to ensure the error code does not display again.  Verify range operation is normal.

  ​

​