Skip to main content
Icon/Error Created with Sketch.
block.addtocart.title

block.addtocart.message


Product Help | Whirlpool

None of the Burners are Lighting

Possible Solutions

Has a household circuit breaker(s) tripped or fuse(s) blown?

Reset the circuit breaker(s) or replace the fuse(s). If the problem continues, call an electrician.

Are the burner ports clogged?

IMPORTANT: Ensure all controls are off and the cooktop is cool before cleaning.  Do not use oven cleaners, bleach, or rust removers. 

  1. Remove the burner cap and burner base.
  2. Remove the burner base and clean the gas tube opening under the base using a damp cloth.
  3. Clean clogged burner ports with a straight pin, needle, or small gauge wire.
  4. Reinstall the burner base and cap. Ensure the alignment pins are properly adjusted with the burner cap and the correct burner cap is on the correct burner base. The burner cap should fit flush with the base and have little side-to-side movement. 
  5.  Turn on the burner. If it does not light, check the cap alignment and whether the correct burner cap is on the correct burner base. 

Is the burner base and burner cap positioned properly? 

The cap must be seated on the burner base to light and perform properly. Be sure the correct burner cap is on the correct burner base.  The burner base and the underside of the burner cap may have a mark indicating which burner cap and burner base match.  The burner cap should fit flush with the base and have minimal side-to-side movement.  

Always keep the burner cap in place when using a surface burner. A clean burner cap, especially the bottom, will help avoid poor ignition and uneven flames. Always clean the burner cap after a spillover and routinely remove and clean the caps. 

Is the main gas valve turned ON?

Verify the main gas valve is ON. If the range was recently installed or re-connected to the gas supply, turn on any one of the surface burner knobs to release any potential air from the gas lines. 

 

Still need help? Contact us or schedule service.

Please contact us or click below to make an appointment from our preferred list of service providers for service on your appliances.

Interested in purchasing an Extended Service Plan?

Please click below to learn more on how you can save up to 25% on New Appliance Extended Service Plans within 30 days of your appliance purchase.

United States

 

Still need help? Contact us or schedule service.

Please contact us or click below to make an appointment from our preferred list of service providers for service on your appliances.

Interested in purchasing an Extended Service Plan?

Please click below to learn more on how you can save up to 25% on New Appliance Extended Service Plans within 30 days of your appliance purchase.

United States

 

  • Was this article helpful?