Lights Flashing or Blinking- Portable Dishwasher

Was the door opened or power interrupted during the cycle?

• The Start/Resume light flashing, (Select models), indicates the cycle or start-up was interrupted.
• This can happen if the door is opened during the cycle or power has been interrupted.
• Push the door firmly closed within 3 seconds of pressing Start/Resume.
• If the door is not closed within 3 seconds, the Start/Resume light will flash, an audible tone may be heard, and the cycle will not start. 

Is the dishwasher set for a delay start?

With the delay wash option selected: 

• The dishwasher cycle starts at a later time or during off-peak electrical hours.
•  Will NOT run until the delay time is reached.
• You can add items to the load anytime during the delay countdown. After adding items, firmly close the door until it latches.
• The delay countdown will not continue if the door is not latched. This will keep the unit from operating/ washing. 

To Turn Off the Delay Wash Feature:

• Press CANCEL/DRAIN to cancel the delay. Then press START/RESUME to start a cycle without a delay. 

CLICK HERE for more information on using Delay Start.

Cycle power to the control to reset the dishwasher:

Much like all machines/ appliances, resetting the dishwasher control can sometimes solve the issues you are experiencing.

To reset the dishwasher control panel, it needs to be disconnected from the power source for one minute.

• For a dishwasher that is plugged into an outlet:
  • Simply unplug the unit for one minute.
  • Then plug it back in.
• If the dishwasher is hard-wired to the power supply:
  • Turn the breaker off at the home's electrical panel that powers the dishwasher, for one minute. 
  • Then turn the breaker back on.