L2 - Error Code - Commercial Dryer

Last updated
Save as PDF
Share
1. Share
2. Tweet
3. Share

Possible Solutions

There May be a Problem with the Home Power Supply:

An L2 (Low or No Line Voltage) Error code indicates that there may be a problem with your home power supply, keeping the dryer's heater from turning on. The dryer will continue to run when this error code is present. Touch any pad to clear the code from the display and return to the estimated time remaining.

Try the Following:

Check to see if a household fuse has blown or circuit breaker has tripped. Electric dryers use two household fuses or breakers. Replace the dryer fuse(s) or turn off the household circuit breaker for the dryer for one (1) minute, to reset the circuit breaker, then turn on the circuit breaker.
Confirm that the power cord is properly installed. Refer the Installation Instructions for details.
Select a Timed Dry heated cycle and restart the dryer.

If the message persists, contact a qualified electrician to verify the electrical supply.

If you would like to download or view product literature for your appliance, please visit our Manuals and Literature page.