Error Codes in my Whirlpool Dryers
|Error code||Possible solutions|
|AF or F4E3||
Restricted air flow. It indicates that the lint screen or vent is clogged; the vent is crushed, kinked or has too many turns. The dryer will continue to run when the is error is present. Touch any key to clear the code from the display and return to the estimated time remaining.
You may also receive an F4 E3 for this issue.
CLICK HERE for more information on dryer venting
|F# E#||If a code beginning with an "F" appears in the display, alternating between F# and E#, the dryer control has detected a problem that requires service. Contact Us or Schedule Service Online|
|L2||Low or no line voltage. There may be a problem with your home power supply, keeping the dryer's heater from turning on. The dryer will continue to run when this diagnostic code is present. Touch any pad to clear the code from the display and return to the estimated time remaining.
NOTE: This error will only show during the initial installation.
Try the Following:
|PF||Power failure. It indicates that the drying cycle has been interrupted by a power failure. Touch and hold START to restart the dryer cycle or press POWER to clear the display.|
For other questions regarding Error Codes, see your Owner's Manual.
If you would like to download or view product literature for your appliance, please visit our Manuals and Literature page.