Skip to main content
Icon/Error Created with Sketch.
block.addtocart.title

block.addtocart.message


Product Help | Whirlpool

Detergent Concentration for Bulk Dispensers

Detergent Concentration for Bulk Dispensers in your Whirlpool Washer

Some front-load and top-load washers can use a Bulk Dispensing system, which uses an automatic dispenser for liquid HE detergent. This allows the consumer to fill the dispenser in advance, and it will automatically dispense the correct amount of detergent based on the load selected, detergent concentration and water hardness selected.

It is essential to understand detergent concentration, as you need to input this setting on the machine.

About Detergent Concentration:

Today's liquid HE detergents are concentrated. Most brands of concentrated HE detergent will show the concentration level on the bottle. If so, set the concentration level in the Precision or Optimal Dispense menu to match the level indicated on the bottle.

However, it can be easily calculated if the detergent bottle does not give the concentration. Just divide the package size in fluid ounces by the number of loads. Then, refer to the chart below to find the concentration.

If you do not get your desired cleaning results, try using a lower concentration number. If you have excess suds, try using a higher concentration number.

 

Concentration

Number of Ounces ÷ Number of Loads

1X >2.5
2X 1.5 - 2.49
3X 0.9 - 1.49
4X 0.7 - 0.89
5X .05 - 0.69
6X 0.3 - 0.49

Once the setting is selected, it will stay at that concentration level. However, touching the controls will change the setting. Once you have selected the desired concentration level, you should not touch the control again unless you are resetting the concentration level.

Load & Go™ Bulk Dispenser

To use the Load & Go™ Dispenser, follow the following steps. NOTE: Instruction may vary based on the model number; please reference your Owner's Manual for specific instructions for your model.

  1. Touch the TOOLS button and scroll down to "Dispenser 1" or "Dispenser 2"
  2. Choose between: Active, Disabled (1 Cycle), or Off (Permanently)
  3. Set the Detergent Concentration choose between: 2X, 3X, 4X, 5X, 6X, 8X

Precision Dispense 

To use the Precision Detergent option:

  1. Fill the Precision HE Detergent dispenser cartridge to the max line with liquid HE detergent.
  2. Place the full dispenser cartridge in the dispensing drawer in the upper left-hand corner of the washer.
  3. Press the PRECISION DISPENSE button.
  4. Select the HE detergent concentration as it appears on the HE detergent container and adjust the Water Hardness if you have a different water hardness level.

CLICK HERE for additional information on using the Precision Dispenser

Which detergent should you use?

Whirlpool recommends using Swash™ Laundry Detergent. It is designed to work in both high-efficiency (HE) and non-HE washing machines. With an 8x concentrated formula, you’ll use about a quarter of the detergent you’d need with a traditional 2x concentration detergent. It may look like a small amount, but you’ll be amazed at its effectiveness.

The Smart Way to Wash

From our Precision Pour Cap to our ultra-concentrated formula, Swash® delivers the results you want in a compact, intelligent bottle design.

swash logo.jpg

  • Was this article helpful?