Low Ice Production - Bottom Freezer
Possible Solutions
New Installation?
- Wait 24 hours after ice maker installation for ice production to begin.
- Discard the first three batches of ice produced.
- The first couple of batches may be wet, slushy and not fully formed, because the refrigerator hasn't reached the correct internal temperature.
How does Nugget Ice work?
Unlike standard ice makers, this machine produces nugget ice in a continuous cycle. Because nugget ice is soft and chewable, it naturally melts over time. To keep the bin full, the machine automatically turns on as needed to replace melted ice, holding about 2.4 lbs at a time. A completely empty bin takes about 6 hours to fully replenish. During heavy use, the ice maker will run continuously to keep up with demand.
Was the water filter recently replaced?
If the water filter was just replaced or installed, ensure that it was installed correctly. An improperly installed water filter could reduce or stop water flow, decrease ice production, cause leaks from the filter housing, or lead to other concerns. Check to make sure the water filter is locked in place and creating a proper seal. To check the installation, remove the water filter from the housing and try to dispense some water. If water dispenses, the water filter was installed improperly; reinstall it.
If you need help installing your water filter, watch the everydrop® instructional videos.
Was the Water Filter Flushed?
Flushing the system is needed whenever the filter is changed or installed. Flushing your refrigerator water filter is a key step that reduces excess air, prepares the filter for use, and removes excess carbon. Air in the water system may cause dripping at the dispenser, small or hollow ice cubes, or a cloudy appearance in the water quality. The amount of water needed to flush the water filter varies depending on the specific filter. Some filters require 1, 2, or 4 gallons to be dispensed for a proper flush; refer to the water filter's instructions for specific guidelines.
No dispenser? If your refrigerator doesn't have an internal or external water dispenser, after connecting to a water source or replacing the water filter, fill and discard three full ice containers to prepare the water filter for use. This will remove some of the loose carbon.
Review How to Flush the Water System in a Refrigerator for more information.
Still need help? Contact us or schedule service.
Please contact us or click below to make an appointment from our preferred list of service providers for service on your appliances.
United States
Canada
Interested in purchasing an Extended Service Plan?
Please click below to learn more on how you can save up to 25% on New Appliance Extended Service Plans within 30 days of your appliance purchase.
United States
Canada
