Moving or Adjusting the Shelves - Refrigerator

Last updated
Save as PDF
Share
1. Share
2. Tweet
3. Share

Possible Solutions

How to remove and replace the shelves

The shelves in your refrigerator are adjustable to match your individual storage needs. Storing similar food items together in your refrigerator and adjusting the shelves to accommodate different item heights will make finding the exact item you want easier. It will also reduce the amount of time the refrigerator door is open and save energy.

NOTE: Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. Tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use both hands when removing them to avoid dropping

Full-Width Shelf

Remove items from the shelf.
Lift the shelf gently using both hands until it is out of the side supports.
Slide the shelf gently out of the Refrigerator. Do not let the shelf touch the side walls of the Refrigerator or the doors.

Full Width Shelf.png

Half-Width Shelf

Remove items from the shelf.
Tilt the front of the shelf up. Lift the shelf out of the shelf supports.
Reinstall the shelf by guiding the rear shelf hooks into the shelf supports. Tilt the front of the shelf up until the rear shelf hooks go into the shelf supports.
Lower the front of the shelf. Make sure the shelf is in the correct position.

Half Width Shelf.png

Nesting Shelf

Pull down the lower part of the shelf using your fingers until is complete down the lower part of the shelf.
Remove any food item placed in the lower surface.
Push up the lower part of the shelf using your fingers until is folded back and secured together with the main shelf body.
There is a magnet to keep shelf secured in the upper position, the shelf will be secured in place by itself.

Nesting Shelf.png

Wine Rack

Under one shelf, there are brackets installed to the supports (one bracket on each support). The wine rack rests in these brackets.
To remove and replace the wine rack:

Remove the wine rack by lifting it up off the brackets. Press the right-hand side of the rack inward until it is free of its bracket. Lower the right-hand side slightly and disengage the left-hand side from its bracket.
Replace the wine rack by inserting the left-hand side into its bracket. Press inward on the right-hand side until it will slide past the bracket edge and set it into its bracket.

Wine Rack.png

Tuck/Slide Away Shelf

To retract the front-section of the shelf, slightly lift up on the front edge and push the adjustable portion of the shelf back toward the rear of the refrigerator.
Extend the front of the shelf by pulling the retracted portion of the shelf outward until it is fully extended.

Tuckaway Shelf.png