Dripping from Dispenser - Side by Side Refrigerator

Last updated
Save as PDF
Share
1. Share
2. Tweet
3. Share

Possible Solutions

Was the water filter recently replaced?

If the water filter was just replaced or installed, ensure the filter was installed correctly. If the water filter is not seated properly, it can cause; no or low ice production and water not dispensing properly. Try removing the water filter and re-installing it.

CLICK HERE for information on how to replace the water filter

Is the water filter damaged?

Remove the filter and inspect it for cracks or damage.
Be sure the O-rings are still in place.
If the filter is cracked or damaged, replace the filter with a new one.

Was the water filter flushed?

Use a sturdy container to depress and hold the water dispenser lever for 5 seconds and then release it for 5 seconds.
Repeat the process until water starts to flow at a steady pass and all the air is out of the water line. You may discard up to 4 gallons of water during this process.

After flushing the water system, allow 24 hours for the refrigerator to cool and chill the water. Then, dispense enough water every week to maintain a fresh supply.

Do more with fresh, filtered water

Our convenient water filters reduce contaminants to provide refreshing hydration and limitless inspiration—right from your refrigerator. To purchase an EveryDrop^TMwater filter, visit your local retailer or visit EveryDrop online.