Changing the Water Filter - Freestanding Ice Maker

Recommended Replacement Schedule for Water Filters

For efficient operation of your Whirlpool undercounter ice maker, regularly replacing the ice machine water filter is key. A general guideline is to change your water filter every six months, 2000 gallons of water used, when the indicator light comes on, or as needed. 

Usage frequency and water quality can affect the lifespan of the water filter for ice maker systems. High usage or hard water can necessitate more frequent changes. If you notice decreased ice production or changes in taste or odor, consider an earlier replacement. Always consult your user manual for model-specific advice to ensure optimal performance and longevity.

NOTE: If the filter is clogged and you are not able to immediately replace it, leave the filter out so the water system is in bypass mode. With the filter removed, the water system will continue to operate, bypassing the filter, and the clogged filter will not cause inadequate performance. 

How to Change the Water Filter in Your Undercounter Ice Maker

Knowing when to change the water filter in undercounter ice maker units is essential for ice quality and appliance longevity. Follow these steps for a safe filter change:

1. Purchase an approved water filter.
2. Take the water filter out of its packaging and remove the cover from the O-rings. Be sure the O-rings are still in place after the cover is removed.
3. The water filter compartment is located on the right-hand side of the ice maker controls. If the door is equipped on the 15" (38.1 cm) models, push in on the door to release the latch, and then lower the door.
4. Using the arrow pointing to the alignment pin on the side of the filter and the arrow inside the control housing, align the alignment pin with the cutout notch and insert the filter into the housing.
5. Turn the filter clockwise until it locks into the housing. Ensure that the alignment arrow on the filter head aligns with the locked symbol on the control box housing. NOTE: If the filter is not correctly locked into the housing, the ice maker will not produce ice.

NOTE: The filter status will automatically reset after the water filter is replaced.