Skip to main content
Whirlpool Home Appliances

F24

You may see this symbol (illuminated in red):

Possible Solutions

F24 Error Code could mean 1 of 2 things:

  1.  Too much laundry for a program/cycle with a small maximum load.

If so, select and start the Rinse & Spin program to complete the interrupted wash program/cycle. Do not overload the washer. Follow the maximum load size indicated in the “Program/ Cycle Guide" in your Use and Care Guide.

2.   Too much inlet water.

Turn off the water faucet. Touch and hold the Power button for at least 3 seconds to drain the water; wait until the drain phase has ended (End will appear on the display).

Turn on the water faucet again. If water immediately flows into the washer without a program/cycle being started, close the water faucet and turn off and unplug the washer. See the “Assistance or Service” section of your Use and Care Guide to contact a service representative.

If you would like to download or view product literature for your appliance, please visit our Manuals and Literature page.

 

Still need help? Call or schedule service.

You may need assistance from a qualified technician. Call 1-866-698-2538 or click below to schedule an appointment.

 

 

 

  • Was this article helpful?