Is the oven control set correctly?
Refer to your Use & Care Guide for more information.
Is the control lock on?
Set the control(s) correctly.
Refer to the Use and Care Guide for detailed control operation instructions.
If you would like to download or view product literature for your appliance, please visit our Manuals and Literature page.
Has a household circuit breaker tripped or fuse blown?
Check to make sure a household fuse has not blown or that a circuit breaker has tripped. Reset the circuit breaker or replace the fuse if necessary.
Power unit down by turning off the circuit breaker(s) for thirty (30) seconds.
Power unit up by turning on the circuit breaker(s).
If the problem continues, contact a licensed electrician.
If not resolved, please note the following:
Disconnect power cord and / or turn off circuit breaker that controls the appliance.
Has there been a recent power outage (Control Displaying F9 or F9 E0 Error Code)?
During a power outage, if there was an unexpected amount of power supply line "noise" that the control detected as incorrect voltage amount, the control could display the F9 or F9 E0 error code. Also, if any keys were pressed before the 10 second delay interval on power up, this could cause the F9 or F9 E0 to appear.
If a recent power outage has occurred, turn off the household circuit breaker for the range for one (1) minute. Then reset the circuit breaker and monitor the range for one (1) minute to ensure the error code does not display again. Verify range operation is normal.
Still need help? Call or schedule service.
You may need assistance from a qualified technician. Call 1-866-698-2538 or click below to schedule an appointment.