Skip to main content
Whirlpool Home Appliances

Cycle Time

Possible Solutions

Cycle Time (+ or -)

Thin Twin Control.jpg

Omnia #4.JPG     (shown above #4)

  • Press “+” or “-” to adjust the duration of a cycle.
  • The LED display will show the time remaining for the cycle to complete.
  • If an out-of-range adjustment is made, a buzzer will sound.

End-of-Cycle Signal

  • Press and hold the plus (+) button for 3 seconds to enable or disable the end-of-cycle signal.
  • Press and hold the minus (-) button for 3 seconds to mute the signal.



Still need help? Call or schedule service.

You may need assistance from a qualified technician. Call 1-866-698-2538 or click below to schedule an appointment.



  • Was this article helpful?