Wash Light On or Flashing:
The Wash Light is On or Flashing when the water level does not change for a period of time OR water is present but the control does not detect the water level changing.
If the Wash Light is on or flashing and a wash cycle is not running, check the following:
Is the water supply connected correctly?
- Verify that both the hot and cold water faucets are both completely open.
- Turn off the water and remove the inlet hoses from the washer. Carefully remove any accumulated film or particles from the water inlet valve screens. Reinstall the hoses, turn on water, and check for leaks.
- Turn on the water. Check the household faucets to see if the hot and cold water faucets are turned on. Make sure to open both faucets completely for proper fill.
CLICK HERE for more information on the water inlet hose installation
Is the drain hose installed correctly?
- The drain hose may be too far down inside the drainpipe (standpipe) or laundry tub.
CLICK HERE for more information on the drain hose installation
Still need help? Call or schedule service.
You may need assistance from a qualified technician. Call 1-866-698-2538 or click below to schedule an appointment.