Skip to main content
Icon/Error Created with Sketch.


Product Help | Whirlpool

Cleaning Gas Cooktop Burners and Ports

Best Cleaning Method for Gas Cooktop Burners & Ports

It’s important to properly clean your gas cooktop burners. Failure to do so may result in flames that will not cook evenly.

IMPORTANT:  Before cleaning, make sure all controls are off and the cooktop is cool.  Do not use oven cleaners, bleach or rust removers. 

Gather  the needed materials for cleaning. Find a non-abrasive plastic scrubbing pad and mildly abrasive cleaner.

  1. Remove the burner cap and burner base, clean following instructions below. Clean with a nonabrasive plastic scrubbing pad and mildly abrasive cleaner.  The cooktop is easiest to clean as soon as the top, grates and caps are cool following cooking. Do not clean burner caps in the oven during a Self-Cleaning cycle. Do not wash burner caps in the dishwasher. 
  2. Clean the gas tube opening under the base. Gently clean the igniter with a damp cloth.
  3. Clean clogged burner ports with a straight pin, needle, or small-gauge wire as shown.

Cleaning burner base with pin.jpg

NOTE: Do not use a wooden toothpick, it can break off and prevent proper gas flow. Do not clean in the dishwasher. Do not enlarge or distort the port.

  1. Reinstall the burner base and cap; make sure the alignment pins(if present) are properly adjusted with the burner cap and the correct burner cap is on the correct burner base.  The burner cap should fit flush with the burner base and have very little side to side movement. 
  2. Turn on the burner. If the burner does not light, check cap alignment and if the correct burner cap is on the correct burner base. 

For more, watch the below video on cleaning surface burners:

If you would like to download or view product literature for your appliance, please visit our Manuals and Literature page.