Skip to main content
Icon/Error Created with Sketch.
block.addtocart.title

block.addtocart.message


Product Help | Whirlpool

Coil Element not Operating Correctly

Coil Element Cycles On and Off on My New Whirlpool Cooktop

Coil elements on new electric and freestanding ranges have changed starting from June 2018. Ranges and cooktops using this type of burner are now equipped with temperature-limiting coils. This change is due to the updated UL (Underwriters Laboratory) standards. This change will be standard for all brands and all replacement parts as well.

The outer element coils will remain on all the time but may appear to not "glow" as strongly as your previous element. The inner coil will cycle on and off and glow red when it is cycling on. It will glow, then turn off and on as the burner is being used. This is a normal operation.

See picture below:

Outer element coils appearing as not glowing even if power is on

This change should have minimal performance changes to the cooktop. However, it may take longer to heat large volumes of water. 

  • Use the correct size burner for the pot or pan you are using. Pots should not overlap the burner by more than 1/2 inch.
  • Use flat bottom pans and put a cover or lid on the pot when boiling water.
 

 

  • Was this article helpful?