Door is Not Sealing - Not Cooling - Chest Freezer

Possible Solutions

Is the freezer level?

If the freezer is not level, it may not seal properly. Level the freezer from side to side and front to back so that the lid will close properly.       

CLICK HERE for more information on how to level your freezer.

Are the shelves and/or baskets out of position?

If the baskets and/or shelves are out of position, it could cause the following:

• Not allow the lid to close properly
• Not allow the lid to open properly
• Allow moisture and air in, potentially causing excessive frost build-up
• Cause compressor to run longer to maintain temperatures

Is there anything preventing the lid from closing?

• Check to make sure food packages are not preventing the lid from closing properly. Rearrange containers so that they fit more tightly and take up less space.
• If your freezer was recently installed, make sure all packaging has been removed. Some packaging used to avoid damage during shipping could keep the door from opening and closing properly. Remove any material, items, or debris from the door or lid area.

Where is the freezer located?

• Do not install the freezer near an oven, radiator, or another heat source, nor in a location where the temperature will fall below 40°F or exceed 110°F.
• Allow at least 3" (7.5 cm) of air space at the top and on both sides of the freezer and 2" (2.5 cm) between the back of the freezer and the wall. If the freezer is against a wall, leave extra space on the hinge side so the door can open wider.