Providing your exact location will allow us to ensure our products are available in your area.
ZIP Code:
All Merchandise in Cart:
Order Discount:
Total: (Before Taxes, Shipping, and Services):
Link your shopping cart across all your devices!
to your account to save and access your shopping cart on your desktop, tablet, or mobile device.
Be sure to check out our latest offers to start saving!
block.addtocart.message
If the Ice maker is making ice but not dumping it into the ice bin, try resetting the Ice Maker. To reset the ice maker, unplug the refrigerator for 1 minute. After resetting, wait a couple of hours and check for ice production; ice is in the bin.
Refer to How to Check the Ice Maker for more information.
A common reason an ice maker does not make ice is that it was accidentally turned off. Sometimes, resetting the ice maker can resolve minor issues. Locate the reset button on your ice maker (consult your manual if unsure) and press and hold it for a few seconds. If your refrigerator doesn't have a reset button, perform a power cycle by unplugging it for 1 minute, then plugging it back in.
If the Ice Maker is not connected to a water supply line but remains turned on, it could cause the following: a buzzing noise, the refrigerator may be too cold, food in the crisper drawers may freeze, and the freezer section may get too cold.
If the water filter was just replaced or installed, ensure that it was installed correctly. An improperly installed water filter could reduce or stop water flow, decrease ice production, cause leaks from the filter housing, or lead to other concerns. Check to make sure the water filter is locked in place and creating a proper seal. To check the installation, remove the water filter from the housing and try to dispense some water. If water dispenses, the water filter was installed improperly; reinstall it.
If you need help installing your water filter, watch the everydrop® instructional videos.
The refrigerator must be installed to a cold water supply for the ice maker and water dispenser to work. To connect the shutoff valve and the refrigerator, use 1/4" (6.35 mm) O.D. (outside diameter) soft copper or PEX tubing. It is recommended to leave a coil of copper or PEX tubing (service loop) to allow the refrigerator to be pulled out of the cabinet or away from the wall for service or routine cleaning. Water supply lines can be purchased at Whirlpool Purchase Genuine Parts.
Check to make sure there are no kinks in the water supply line. A kink can reduce water flow. Straighten the water source line to restore adequate water flow and pressure. To help reduce the chances of a pinched water line, do not push the refrigerator too far back against the wall or cabinet.
It is recommended that the Whirlpool water filter be replaced every 6 months, when the indicator light comes on, or as needed. Replacing your water filter regularly helps ensure a continuous supply of cleaner, fresher-tasting drinking water. Depending on your usage and water quality, it may need to be changed more frequently. A clogged or improperly installed water filter can reduce water flow to the ice maker and dispenser, potentially causing low ice production and slower water flow. Whirlpool recommends using everydrop® water filters. Find the right replacement filter for your refrigerator, and make the simple switch for clean water year-round.
Take a look at Does the Water Filter Need to be Replaced?