Leaking from Bottom Front - Freestanding Ice Maker

Last updated
Save as PDF
Share
1. Share
2. Tweet
3. Share

Possible Solutions

Is the water leaking from any of the connection points?

Check all connection points in the water supply line. Tighten any connections that leak, including connections at the valve or nuts. Click the link below to see illustrations of the connection points.

CLICK HERE for more information on checking the connection points

Is the water supply line installed correctly?

Ensure the water supply line is installed correctly, and the correct tubing is used. We recommend using copper tubing or Whirlpool supply line, Part Number 8212547RP. Using any other type of cold water supply line could cause odd/off-tasting ice. Check all the connection points for leaks.

CLICK HERE for more information on how to install the water supply line.

Are all the clamps installed and secure?

Check to make sure all provided hose clamps are installed and tight. Clamps that are not secured properly could leak and cause draining concerns.

Ensure all provided hose clamps of drain tube (i.e. 2 adjustable hose clamps, drain tube, and drain pump reservoir inlet) are installed and tight.

Is the ice maker level?

It is important for the ice maker to be level to work properly. Depending upon where you install the ice maker, you may need to make several adjustments to level it. You may also use the leveling legs to lower the height of the ice maker for under-counter installations.

CLICK HERE for more information on how to level the Ice Maker

Do more with fresh, filtered water

Our convenient water filters reduce contaminants to provide refreshing hydration and limitless inspiration—right from your refrigerator. To purchase an EveryDrop^TMwater filter, visit your local retailer or visit EveryDrop online.

Home | Everydrop Water